Department of
MECHANICAL ENGINEERING

Faculty

Dr. Oleg Shiryayev Assistant Professor Office: Ruwais Building, Room 3009 Phone: +971 2 607 5451 Fax: +971 2 607 5194

Dr. Shiryayev joined the Petroleum Institute as an Assistant Professor in mechanical engineering in August, 2010. He graduated with a B.S. in Mechanical Engineering (Summa Cum Laude), and M.Sc. in Engineering from Wright State University in Dayton, Ohio, USA. He was awarded a Ph.D. at the same institution in 2008. His dissertation was focused on the development of a novel structural health monitoring method based on random vibration measurements.  His research interests are in the areas of nonlinear dynamics, system identification, and structural health monitoring. He participated in various research projects including modeling of nonlinear dynamic behavior of bolted joints, vibration suppression using shunted piezoelectric actuators, and modeling of jet engine dynamics during in-flight power extraction.

Journal Publications

• O. Shiryayev and J. Slater, “Detection of Fatigue Cracks Using Random Decrement Signatures,” Structural Health Monitoring, vol. 9, No. 4, July 2010, pp. 347-360.
• O. Shiryayev and J. Slater, “Improved Structural Damage Identification Using Random Decrement Signatures: Application to FEM Data,” Structural Control and Health Monitoring, vol. 15, No. 7, November 2008, pp. 1006-1020.
• O. Shiryayev, S. Page, C. Pettit, and J. Slater,"Parameter Identification and Investigation of a Bolted Joint Model," Journal of Sound and Vibration, vol. 307, No. 3-5, November 2007, pp. 680-697.
• O. Shiryayev and J. Slater, "Panel Flutter Model Identification Using the Minimum Model Error Method on the Forced Response Measurements," ASME Journal of Vibration and Acoustics, vol. 128, No. 5, October 2006, pp. 635-645.
• O. Shiryayev and J. Slater, "Aeroelastic System Identification Using the Minimum Model Error Method," AIAA Journal of Guidance, Control, and Dynamics, vol. 29, No. 4, July-August 2006, pp. 936-943.

Papers Published in Conference Proceedings

• O. Shiryayev, J. Gaerke, P. Cooley, and J. Slater, “Application of the Campbell Diagram Concept to Identification of Fatigue Cracks in Bladed Disk Assemblies,” AIAA-2011-1938, 52nd AIAA/ASME/ASCE/ AHS/ASC Structures, Structural Dynamics & Materials Conference, Denver, CO, April 2011.
• O. Shiryayev and J. Slater, “Sensitivity Studies of Nonlinear Vibration Features For Detection of Cracks in Turbomachinery Components,” AIAA-2010-3030, 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Orlando, FL, April 2010.
• J. Snyder, C. Barnes, J. Rinderle, O. Shiryayev, and J. Slater, “Experimental Near-Space Free Fall Testing Systems,” AIAA-2010-2982, 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Orlando, FL, April 2010.
• Shiryayev, O.V. and Slater, J.C., “Supplemental Investigations on Structural Damage Detection Using Randomdec Signatures from Experimental Data,” AIAA-2009-2330, 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Palm Springs, CA, May 2009.
• Meier, M., Shiryayev, O.V., and Slater, J.C., “Investigation of Candidate Features For Crack Detection in Fan and Turbine Blades and Disks,” AIAA-2009-2671, 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Palm Springs, CA, May 2009.
• O. Shiryayev and J. Slater, “Structural Damage Identification Using Random Decrement Signatures from Experimental Data,” AIAA-2008-2163,49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Schaumburg, IL, April 2008.
• A. Anisetti, O. Shiryayev, and J. Slater, “Nonlinear Shunting of Piezo Actuators for Vibration Suppression,” AIAA-2008-2237, 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Schaumburg, IL, April 2008.
• O. Shiryayev and J. Slater, “Structural Damage Identification Using Random Decrement Signatures: Application to FEM Data,” AIAA-2007-2056,48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Waikiki, HI, April 2007.
• O. Shiryayev and J. Slater, “Application of the Random Decrement Technique to Nonlinear Dynamic Systems,” AIAA-2006-1883, 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Newport, RI, May 2006.
• O. Shiryayev and J. Slater, “Effects of Proper Orthogonal Decomposition on Identification Using the Minimum Model Error Algorithm,” AIAA-2006-2036, 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Newport, RI, May 2006.
• S. Page, O. Shiryayev, J. Slater, and C. Pettit, “Experimentally Quantifying the Dynamic Response of Bolted Lap Joints,” AIAA-2006-1657, 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Newport, RI, May 2006.
• C. Pettit, O. Shiryayev, S. Page, and J. Slater, “Parameter Identification and Investigation of a Bolted Joint Model,” AIAA-2005-2378, 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Austin, TX, April 2005.
• O. Shiryayev and J. Slater, “Panel Flutter Model Identification Using the Minimum Model Error Method. Part 1: Free Response,” AIAA-2004-1852, 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Palm Springs, CA, April 2004.
• O. Shiryayev and J. Slater, “Panel Flutter Model Identification Using the Minimum Model Error Method. Part 2: Forced Response,” AIAA-2004-1857, 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Palm Springs, CA, April 2004.
• O. Shiryayev, J. Slater, C. Pettit, and S. Page, “Calibration and Variability of Hysteretic Models for a Single Bolted Lap Joint,” AIAA-2004-1622, 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Palm Springs, CA, April 2004.
• O. Shiryayev, J. Slater, C. Cross, and T. George, “Control of Resonant Fatigue Tests in the Existence of Bifurcations,” 8th National Turbine Engine High Cycle Fatigue (HCF) Conference, Monterey, CA, April 2003.
• R. Wagner and O. Shiryayev, “Plug and Play Instrumentation For Turbine Blades,” AIAA-2003-111, 41st Aerospace Sciences Meeting and Exhibit, Reno, NV, January 2003.

Awards

• Best technical presentation, 34th Dayton-Cincinnati Aerospace Sciences Symposium, Materials, 2009
• Wright State University Ph.D. in Engineering Assistantship, 2007
• Wright State University Graduate Council Scholar Fellowship
• Wright State University Graduate Student Excellence Award
• Dayton Area Graduate Studies Institute (DAGSI) Masters Scholarship
• Electrical Manufacturing and Coil Winding Association (EMCWA) Scholarship

Reviewer for Archival Journals

• Journal of Vibration and Acoustics, American Society of Mechanical Engineers, USA.
• AIAA Journal, American Institute of Aeronautics and Astronautics, USA.
• Journal of Sound and Vibration, Elsevier, Netherlands.
• Shock and Vibration, IOS Press, Netherlands.

Service and Professional Affiliations

• Session chair, Vibration Testing, 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Denver, CO, April 2011.
• Session chair, Control, 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Orlando, FL, April 2010.
• Session chair, Biomechanics, Dayton Engineering Sciences Symposium, October 2009.
• Co-chair of the 2nd Wright State University Graduate Student Symposium on Engineering and Computer Science, May 2005.
• Member of American Society of Mechanical Engineers (ASME) since March 2005.
• Member of American Institute of Aeronautics and Astronautics (AIAA) since March 2002.

Research Keywords

System identification, structural dynamics, vibration, system modeling